-
Nodes in the range of 10.000 to 11.000 are used for the definition of joints, accelerometers, etc.
-
Nodes with node IDs above 11.000 are used only in *NODE and *ELEMENT cards.
-
Elements in the range of 10.000 to 11.000 are used for the definition of history, discrete elements, etc.
-
Elements with IDs above 11.000 are used only in *ELEMENT cards.
The numbering of the material tables and load curves is defined by parameters. The default range is given under the section Overview >> Numbering Scheme. If the model should be renumbered, all tables and load curves must be renumbered by using the parameter wloff. This parameter gives a numbering offset on all table IDs and load curve IDs.
